| Taisol CGK742092
A relatively new player in PC cooling industry, Taisol was
founded in 1997. This heatsink, commonly known as the Taisol
1.3GHz in Malaysia, is rated for use with Socket 370 and Socket A
processors up to 1.3GHz. In fact, this is the standard cooler for
AMD Athlon 1.3GHz processors, if I'm not mistaken.
The bottom of the heatsink is flat but while I was trying to
remove the included thermal tape, I accidentally scratched the
heatsink. So, I had to lap it myself. BTW, this cooler's clip
actually uses all the six tabs on the Socket A and four tabs on
the Socket 370! A good cooler to use if you accidentally broke the
middle tab on your CPU socket.
The fan is thin but pushes a reasonable amount of air. Still,
it is underpowered for most overclockers. The clip is fairly tight
and will require a small screwdriver to install the cooler.

|
Fan
|
| Rated Voltage |
DC 12V |
| Rated Current |
DC 0.18A |
| Input Power |
2.16W |
| Fan Speed |
4,800 RPM |
| Air Delivery |
21.19 CFM |
| Fan Life |
70,000
hours |
| Fan Safety |
UL, CSA,
VDE, CE Approved |
| Connector |
3 pin Molex
2695 |
|
Heatsink
|
| Material |
Aluminum
Alloy AL6063-T5 |
| Finish |
De-greased |
| Dimensions |
80 x 60 x
58.30 mm |
| Total Weight |
248g |
|